How to effectively solve the wear problem of belt vulcanizer?

During the use of the belt vulcanizer, if the belt vulcanizer is in overload operation for a long time, incorrect operation methods, and the belt vulcanizer is in wear state for a long time, these problems will seriously affect the service life of the belt vulcanizer. During the operation of the belt vulcanizer, the vibration impact and other combined forces will easily lead to the formation of gaps between parts and wear.

The traditional repair methods include surfacing, thermal spraying, electric brush, etc., but there are some disadvantages in these methods: surfacing will make the surface of the part reach a very high temperature, causing deformation or cracks of the part, affecting the dimensional accuracy and normal use, and even causing fracture in serious cases; Although there is no thermal effect on the brush ferry, the thickness of the ferry should not be too thick, causing serious pollution and limiting its application.

Belt vulcanizer

Because the material is a "variable" relationship, when the external force impacts the material, the material will deform and absorb the external force, and expand and contract with the expansion and contraction of the bearing or other parts, always keeping a tight fit with the parts, reducing the probability of wear. For the wear of large curing press, "mold" or "matching parts" can also be used to repair the damaged curing press equipment on site to avoid the overall disassembly of the equipment, ensure the matching size of parts and meet the production and operation requirements of the curing press equipment.

There will be more or less wear during the operation of the belt vulcanizer. The vulcanizer equipment in the wear state for a long time will seriously affect the working efficiency and the service life of the equipment. If the wear problem of the belt vulcanizer is not solved effectively in time, it will cause serious damage to the vulcanizer equipment. The electric heating adopts TED-2301 temperature indicating regulator to control and display the temperature of hot plate, with high temperature control accuracy, intuitive temperature display and convenient adjustment.

The parallel oil supply mode of low pressure large flow gear pump and high pressure small flow gear pump is adopted to ensure the rapid rise of hot plate and save electric energy. The belt vulcanizer adopts an automatic pressure supplement device to ensure the quality stability of the products. The body part is composed of upper base, lower base, oil tank, hot plate, oil cylinder, plunger, etc. The four columns bear 25T tension and serve as guide rails for hot plate lifting. Suitable for vulcanization of various rubber products and pressing of plastic products.