Brief Description of Storage Environment of Vulcanizing Press

The principle of vulcanizing machine for measuring the vulcanization characteristics of unvulcanized rubber: put the unvulcanized rubber sample into a completely sealed or almost completely sealed mold cavity, and keep it at the set test temperature. The mold cavity has two parts, the upper part and the lower part, one of which is small swing angle oscillation. This torque (force) depends on the colloid generated during vulcanization. The shear modulus varies with the length of vulcanization time. The vulcanizer automatically records the torque value reflecting the shear strain generated by the rubber. Therefore, the relationship curve between torque and time, namely vulcanization curve, is obtained.

Features of curing press:

1. The instrument uses the same real closed mold cavity as Alpha (the former Monsanto) of the United States.

2. The curing press is based on a large database development platform, and the temperature control device is directly controlled and collected by software. It overcomes the shortcomings (poor precision) of temperature control of general curing press. This technology leads the new international trend.

3. This instrument has the functions of statistical data, analysis, storage and comparison. Humanized design, convenient operation.

Attention shall be paid to the following problems during maintenance of curing press:

1. The curing machine shall be stored in a dry and well ventilated environment to avoid damp wires;

2. Do not use the curing machine outdoors in rainy days to prevent water from entering the electric cabinet and heating plate;

3 If the working environment is wet, when disassembling and handling the vulcanizer, the articles shall be placed on the ground, and the vulcanizer shall not be directly contacted with water; Flat curing press

4. If water enters the heating plate due to improper operation during use, contact the manufacturer for maintenance.

5. If the curing machine is not required to be used for a long time, the heating plate shall be heated once every half month (the temperature shall be set at 100 ℃), and the temperature shall be kept for about half an hour.

6. After each use, the water in the water pressure plate shall be cleaned. Especially in winter, if the water is not cleaned in time, the rubber of the water pressure plate will age prematurely, reducing the service life of the water pressure plate.